How to Use the Bike Rack

Only conventional single seat, two-wheeled bikes, and recumbent and electric bikes the size of a standard bicycle are allowed on AVTA buses. Bicycles with oversized wheels, tandems and internal combustion engine-powered bicycles are not allowed.  

• As the bus pulls up, raise your hand to attract the attention of the driver.
• Before you step in front of the bus, make sure it completely stops and that the driver sees you.  
• Squeeze the handle on the top of the rack and then lower the rack.  
• Lift your bike and place its wheels in the trough, with the front wheel toward the spring-loaded bar. 
•  Raise the spring-loaded bar up and over the front tire and place it on the top of the tire, close to the bike frame.  
• Remove any loose items or valuables from your bike.  
• If a bike is already in the front trough, load your bike in the rear trough, with your handlebars in the opposite direction of the front bike. 
• Board the bus and pay your fare. 
• As you near your stop, remind the driver that you will be removing your bike. 
• Lower the spring-loaded bar from the tire and lift your bike off the rack.
• Fold up the rack if it is empty.  
• Go to the nearest curbside.
• Wave to let the driver know you and your bike are clear of the bus.
• Never cross the street in front of the bus; passing traffic cannot see you coming around the bus!